Items where Author is "Leggate, William"

Article

Faircloth, A., Gilbert, B. P., Kumar, C., Leggate, W. and McGavin, R. L. (2024) Understanding the Adhesion Performance of Glued Laminated Timber Manufactured with Australian Softwood and High-Density Hardwood Species. Research Square .

Faircloth, A., Gilbert, B. P., Kumar, C., Leggate, W. and McGavin, R. L. (2024) Understanding the adhesion performance of glued laminated timber manufactured with Australian softwood and high-density hardwood species. European Journal of Wood and Wood Products . ISSN 1436-736X

Faircloth, A., Kumar, C., McGavin, R. L., Gilbert, B. P. and Leggate, W. (2023) Mechanical Performance and Bond Integrity of Finger Jointed High-Density Sub-Tropical Hardwoods for Residential Decking. Forests, 14 (5). p. 956. ISSN 1999-4907

Kumar, C. and Leggate, W. (2022) An overview of bio-adhesives for engineered wood products. International Journal of Adhesion and Adhesives, 118 . p. 103187. ISSN 0143-7496

Leggate, W., McGavin, R. L., Outhwaite, A., Gilbert, B. P. and Gunalan, S. (2022) Barriers to the Effective Adhesion of High-Density Hardwood Timbers for Glue-Laminated Beams in Australia. Forests, 13 (7). p. 1038. ISSN 1999-4907

Venn, T. J., Dorries, J. W., McGavin, R. L. and Leggate, W. (2022) Impact of Facility Location on the Financial Performance of Integrated and Distributed LVL Production in Subtropical Eastern Australia. Forests, 13 (11). p. 1903. ISSN 1999-4907

Leggate, W., Outhwaite, A., McGavin, R. L., Gilbert, B. P. and Gunalan, S. (2022) The Effects of the Addition of Surfactants and the Machining Method on the Adhesive Bond Quality of Spotted Gum Glue-laminated Beams. BioResources, 17 (2). pp. 3413-3434. ISSN 1930-2126

Kumar, C., Redman, A., Leggate, W., McGavin, R. L. and Dakin, T. (2021) Assessment of the Application of a SMART THUMPER™ as a Low-cost and Portable Device Used for Stiffness Estimation of Timber Products. BioResources, 16 (3). ISSN 1930-2126

Shirmohammadi, M., Leggate, W. and Redman, A. (2021) Effects of moisture ingress and egress on the performance and service life of mass timber products in buildings: a review. Construction and Building Materials, 290 , 123176. ISSN 0950-0618

Leggate, W., Shirmohammadi, M., McGavin, R. L., Outhwaite, A., Knackstedt, M. and Brookhouse, M. (2021) Examination of wood adhesive bonds via MicroCT: The influence of pre-gluing surface machining treatments for southern pine, spotted gum, and Darwin stringybark timbers. BioResources, 16 (3). pp. 5058-5082. ISSN 1930-2126

Kumar, C., Faircloth, A., Leggate, W. and Redman, A. (2021) Impact of Continuous Drying Method on Drying Quality of Southern Pine Sawn Timber. BioResources, 17 (1). p. 18. ISSN 1930-2126

Leggate, W., McGavin, R. L., Outhwaite, A., Kumar, C., Faircloth, A. and Knackstedt, M. (2021) Influence of Mechanical Surface Preparation Methods on the Bonding of Southern Pine and Spotted Gum: Tensile Shear Strength of Lap Joints. BioResources, 16 (1). p. 16. ISSN 1930-2126

Nguyen, T. T., Redman, A., Leggate, W., Vandi, L.-j., Bailleres, H. and Heitzmann, M. (2021) Processing Parameters Optimization of Cotton Stalk (Gossypium hirsutum L.) Particleboards with Emulsifiable Polymeric Isocyanate Adhesive. BioResources, 16 (2). ISSN 1930-2126

Leggate, W., McGavin, R. L., Outhwaite, A., Dorries, J. W., Robinson, R. J., Kumar, C., Faircloth, A. and Knackstedt, M. (2021) The Influence of Mechanical Surface Preparation Method, Adhesive Type, and Curing Temperature on the Bonding of Darwin Stringybark. BioResources, 16 (1). p. 22. ISSN 1930-2126

Nguyen, T. T., Bailleres, H., Redman, A., Leggate, W., Vandi, L.-j. and Heitzmann, M. (2020) Homogenous Particleboard Made from Whole Cotton (Gossypium hirsutum L.) Stalk Agricultural Waste: Optimisation of Particle Size and Influence of Cotton Residue on Performance. BioResources, 15 (4). pp. 7730-7748. ISSN 1930-2126

Leggate, W., Shirmohammadi, M., McGavin, R. L., Chandra, K. A., Knackstedt, M., Knuefing, L. and Turner, M. (2020) Influence of Wood’s Anatomical and Resin Traits on the Radial Permeability of the Hybrid Pine (Pinus elliottii× Pinus caribaea) Wood in Australia. BioResources, 15 (3). pp. 6851-6873. ISSN 1930-2126

Leggate, W., Kumar, C., McGavin, R. L., Faircloth, A. and Knackstedt, M. (2020) The Effects of Drying Method on the Wood Permeability, Wettability, Treatability, and Gluability of Southern Pine from Australia. Bioresources, 16 . pp. 698-720.

Leggate, W., McGavin, R. L., Miao, C., Outhwaite, A., Chandra, K. A., Dorries, J. W., Kumar, C. and Knackstedt, M. (2020) The Influence of Mechanical Surface Preparation Methods on Southern Pine and Spotted Gum Wood Properties: Wettability and Permeability. BioResources, 15 (4). pp. 8554-8576. ISSN 1930-2126

Leggate, W., McGavin, R. L. and Lewis, T. (2019) An Assessment of Native Forests in Queensland for the Potential Supply of Small-diameter, Peeler Logs for Spindleless Lathe Rotary-veneer Processing. BioResources, 14 (4). p. 15. ISSN 1930-2126

McGavin, R. L. and Leggate, W. (2019) Comparison of Processing Methods for Small-diameter Logs: Sawing versus Rotary Peeling. BioResources, 14 (1). pp. 1545-1536. ISSN 1930-2126

Leggate, W., Redman, A., Wood, J., Bailleres, H. and Lee, D. J. (2019) Radial Permeability of the Hybrid Pine (Pinus elliottii× Pinus caribaea) in Australia. BioResources, 14 (2). pp. 4358-4372. ISSN 1930-2126

Muneri, A., Leggate, W. and Palmer, G. (1999) Relationships between surface growth strain and some tree, wood and sawn timber characteristics of eucalyptus cloeziana. Southern African Forestry Journal, 186 (1). pp. 41-49. ISSN 1029-5925

Book Section

Fitzgerald, C. J., Redman, A., Hopewell, G., McGavin, R. L. and Leggate, W. (2017) Log specifications, grading and pre-processing. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Leggate, W. and McGavin, R. L. (2017) Manufacturing rotary veneer and veneer products from small logs: an overview. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Vella, R., Fehrmann, J., McGavin, R. L. and Leggate, W. (2017) Product grading and quality. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

McGavin, R. L., Vella, R. and Leggate, W. (2017) Product manufacture. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Leggate, W. (2017) Protecting veneers and veneer-based products. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Hopewell, G., Leggate, W. and McGavin, R. L. (2017) Rotary-peeled products: advantages and uses. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Fehrmann, J., McGavin, R. L. and Leggate, W. (2017) Veneer grading and upgrading. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Fehrmann, J., McGavin, R. L. and Leggate, W. (2017) Veneer quality control. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Monograph

Smith, H., Leggate, W., Faircloth, A. and et al., (2023) Advancing enhanced wood manufacturing industries in Laos and Australia. Technical Report. ACIAR.

McGavin, R. L., Leggate, W. and Dorries, J. W. (2020) Increasing the Value of Forest Resources through the Development of Advanced Engineered Wood Products. Project Report. Forest & Wood Products Australia.

McGavin, R. L., Leggate, W., Bailleres, H., Hopewell, G. and Fitzgerald, C. J. (2019) A guide to the rotary veneer processing of coconut palms. Project Report. Australian Centre for International Agricultural Research.

Dakin, T. and Leggate, W. (2019) Development of durable engineered wood products in Papua New Guinea and Australia. Project Report. ACIAR.

Leggate, W. (2018) Improving the durability performance of engineered wood products: A study tour of Europe and North America. Project Report. Gottstein Trust Fellowship Report.

Leggate, W., McGavin, R. L. and Bailleres, H. (2017) A guide to manufacturing rotary veneer and products from small logs. Project Report. ACIAR.

Venn, T., McGavin, R. L. and Leggate, W. (2004) Portable Sawmilling Costs for Landholders in Western Queensland. Working Paper. University of Queensland.

Venn, T. J., McGavin, R. L. and Leggate, W. (2004) Utilisation of western Queensland hardwoods as speciality timbers. Project Report. Rural Industries Research and Development Corporation.

Conference or Workshop Item

Shirmohammadi, M., Karbaschi, M.R., Hassan, B. and Leggate, W. (2023) Investigating wood anatomical factors influencing the treatability of refractory southern pine - an imaging approach. In: International Research Group on Wood Protection (IRG-WP), 28 May - 1st June 2023, Cairns, Australia.

Wood, K., Morrell, J. and Leggate, W. (2020) Enhancing the durability of low durability Eucalyptus plantation species: a review of strategies. In: International Research Group On Wood Protection, 10-11 June 2020.

Leggate, W., Palmer, G., McGavin, R. L. and Muneri, A. (2000) Productivity, sawn recovery and potential rates of return from eucalypt plantations in Queensland. In: IUFRO Conference, The Future of Eucalypts for Wood Products, 19-24 March, 200, Launceston, Tasmania.

Book

Shirmohammadi, M. and Leggate, W. (2021) Review of Existing Methods for Evaluating Adhesive Bonds in Timber Products. IntechOpen, 30 pages. ISBN 1839627727