Items where Author is "Bailleres, H."

Article

Nguyen, H. H., Gilbert, B. P., McGavin, R. L., Bailleres, H. and Karampour, H. (2020) Embedment strength of mixed-species laminated veneer lumbers and cross-banded laminated veneer lumbers. European Journal of Wood and Wood Products, 78 (3). pp. 365-386. ISSN 00183768 (ISSN)

Darzi, S., Karampour, H., Gilbert, B. P. and Bailleres, H. (2018) Numerical study on the flexural capacity of ultra-light composite timber sandwich panels. Composites Part B: Engineering, 155 . pp. 212-224. ISSN 13598368

Gilbert, B. P., Husson, J. M., Bailleres, H., McGavin, R. L. and Fischer, M. (2018) Perpendicular to grain and shear mechanical properties of veneer-based elements glued from single veneer sheets recovered from three species of juvenile subtropical hardwood plantation logs. European Journal of Wood and Wood Products, 76 (6). pp. 1637-1652.

McGavin, R. L., Bailleres, H., Fehrmann, J. and Ozarska, B. (2015) Stiffness and Density Analysis of Rotary Veneer Recovered from Six Species of Australian Plantation Hardwoods. BioResources, 10 (4). pp. 6395-6416.

McGavin, R. L., Bailleres, H., Hamilton, M., Blackburn, D., Vega, M. and Ozarska, B. (2015) Variation in rotary veneer recovery from australian plantation Eucalyptus globulus and Eucalyptus nitens. BioResources, 10 (1). pp. 313-329.

McGavin, R. L., Bailleres, H., Lane, F., Fehrmann, J. and Ozarska, B. (2014) Veneer Grade Analysis of Early to Mid-rotation Plantation Eucalyptus Species in Australia. BioResources, 9 (4). pp. 6562-6581. ISSN 1930-2126

Bailleres, H., Hopewell, G., Boughton, G. and Brancheriau, L. (2012) Strength and stiffness assessment technologies for improving grading effectiveness of radiata pine wood. BioResources, 7 (1). pp. 1264-1282.

Book Section

Thulasidas, P.K. and Bailleres, H. (2017) Wood Quality for Advanced Uses of Teak from Natural and Planted Forests. In: The Global Teak Study: Analysis, Evaluation and Future Potential of Teak Resources. International Union of Forest Research Organizations (IUFRO), Vienna, Austria.

Monograph

McGavin, R. L., Bailleres, H., Lane, F. and Fehrmann, J. (2013) High value timber composite panels from hardwood plantation thinnings. Project Report. Department of Agriculture and Fisheries, Queensland.

Zbonak, A., Bailleres, H., Glencross, K. and Davies, M. (2012) Rotary veneering of plantation-grown spotted gum (Corymbia citriodora subsp. variegata) and Dunn's white gum (Eucalyptus dunnii). Technical Report. Cooperative Research Centre for Forestry.

Dickson, M., Hopewell, G., Bailleres, H., Switala, J., Thomas, C. and Mackenzie, C. (2011) A market assessment and evaluation of structural roundwood products from hardwood pulp plantations. Project Report. Forest and Wood Products Australia Ltd.

Bailleres, H., Hopewell, G. and Boughton, G. (2009) MOE and MOR assessment technologies for improving graded recovery of exotic pines in Australia. Technical Report. Forest and Wood Products Australia.

Bailleres, H., Hopewell, G. and McGavin, R. L. (2008) Evaluation of wood characteristics of tropical post-mid rotation plantation Eucalyptus cloeziana and E. pellita: Part (c) Wood quality and structural properties. Project Report. Forest and Wood Products Australia Ltd, Victoria.

Conference or Workshop Item

Darzi, S., Karampour, H., Bailleres, H., Gilbert, B. P., McGavin, R. L. and Zadeh, S. (2021) Behaviour of composite timber sandwich panels subjected to bending and shear. In: World Conference on Timber Engineering 2021, WCTE 2021, 9-12 August 2021, Santiago, Chile.

Zaben, A., Bailleres, H., Vella, R., McGavin, R. L., Fernando, D., Lange, D. and Maluk, C. (2021) Residual performance of a prototype hybrid Timber-FRP glulam beam after fire. In: World Conference on Timber Engineering 2021, WCTE 2021 9 -12 August 2021, 9 -12 August 2021, Santiago, Chile.

Jiao, S., Gunalan, S., Gilbert, B. P., Baleshan, B. and Bailleres, H. (2019) Development of an innovative composite mullion. In: 7th International Conference on Structural Engineering, Mechanics and Computation, 2019 : Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications -.

Nguyen, H., Gilbert, B. P., McGavin, R. L. and Bailleres, H. (2018) Optimisation of cross-banded laminated veneer lumbers manufactured from spotted gum and southern pine veneers. In: 2018 World Conference on Timber Engineering, WCTE 2018, 19-23 August 2018, Seoul, South Korea.

Gilbert, B. P., Bailleres, H., Zhang, H. and McGavin, R. L. (2016) Mechanical properties of rotary veneers recovered from early to mid-rotation plantation Eucalyptus logs. In: 2016 World Conference on Timber Engineering, WCTE 2016, 22-25 August 2016, Vienna, Austria.

Nikles, D.G., Reilly, D.F., Dickinson, G. R., Bailleres, H., Huth, J.R., Zbonak, A. and Lee, D. J. (2014) Domesticating African mahogany (Khaya senegalensis) in northern Australia – underpinning investment in plantations. Pp 104-130. In: “Trees – the future crop for changing climates”. Proceedings – Full Papers, Australian Forest Growers National Conference held at Forest Research Centre Southern Cross University, Lismore, NSW., 26 October – 29 October 2014, Lismore, NSW 2480. 218 pp.