Items where Subject is "Exploitation and utilization"

A

Armstrong, M., Lelievre, T., Reilly, D. and Robertson, B. (2004) Evaluation of the wood quality and utilization potential of plantation grown Khaya senegalensis (African mahogany). In: Prospects for high-value hardwood timber plantations in the 'dry' tropics of Northern Australia: Proceedings of a Workshop held in Mareeba, North Queensland, Australia, 19-21 October, 2004. Private Forestry North Queensland Association, Inc.

Armstrong, M. (2005) African mahogany highly regarded by industry assessors. Australian Forest Grower, 27 (4). pp. 28-29.

B

Back, P.V., Anderson, E.R., Burrows, W.H. and Playford, C. (2009) Woody plant responses to various clearing strategies imposed on a poplar box (Eucalyptus populnea) community at Dingo in central Queensland. Tropical Grasslands, 43 (1). pp. 37-52.

State Of Queensland Through Its Department Of Agriculture And Fisheries (2018) Drill corer. D/551,835.

Bailleres, H., Lee, D. J., Kumar, C., Psaltis, S., Hopewell, G. and Brancheriau, L. (2019) Improving returns from southern pine plantations through innovative resource characterisation. Project Report. Forest & Wood Products Australia.

Belleville, B., Redman, A., Chounlamounty, P., Phengthajam, V., Xiong, S., Boupha, L. and Ozarska, B. (2018) Potential of Veneer Peeled from Young Eucalypts in Laos. BioResources, 13 (4). pp. 7581-7594.

Bonora, F. S., Nahrung, H. F., Hayes, R. A., Scharaschkin, T., Pegg, G. S. and Lee, D. J. (2020) Changes in leaf chemistry and anatomy of Corymbia citriodora subsp. variegata (Myrtaceae) in response to native and exotic pathogens. Australasian Plant Pathology, 49 . pp. 641-653. https://doi.org/10.1007/s13313-020-00739-z

Brischke, C., Alfredsen, G., Humar, M., Conti, E., Cookson, L., Emmerich, L., Flæte, P. O., Fortino, S., Francis, L. P., Hundhausen, U., Irbe, I., Jacobs, K., Klamer, M., Kržišnik, D., Lesar, B., Melcher, E., Meyer-Veltrup, L., Morrell, J. J., Norton, J., Palanti, S., Presley, G., Reinprecht, L., Singh, T., Stirling, R., Venäläinen, M., Westin, M., Wong, A. H. H. and Suttie, E. (2021) Modeling the Material Resistance of Wood—Part 2: Validation and Optimization of the Meyer-Veltrup Model. Forests, 12 (5). p. 576. https://doi.org/10.3390/f12050576

Brischke, C., Alfredsen, G., Humar, M., Conti, E., Cookson, L., Emmerich, L., Flæte, P. O., Fortino, S., Francis, L. P., Hundhausen, U., Irbe, I., Jacobs, K., Klamer, M., Kržišnik, D., Lesar, B., Melcher, E., Meyer-Veltrup, L., Morrell, J. J., Norton, J., Palanti, S., Presley, G., Reinprecht, L., Singh, T., Stirling, R., Venäläinen, M., Westin, M., Wong, A. H. H. and Suttie, E. (2021) Modelling the Material Resistance of Wood—Part 3: Relative Resistance in above- and in-Ground Situations—Results of a Global Survey. Forests, 12 (5). p. 590. https://doi.org/10.3390/f12050590

Bristow, M., Annandale, M. and Bragg, A. (2005) Growing rainforest timber trees - A farm forestry manual for north Queensland. Manual. Rural Industries Research and Development Corporation.

C

Catchpoole, K., Nester, M. R., Leban, J.M. and Harding, K. J. (2005) Using modeling and simulated sawing to value the resource of Pinus caribaea var. hondurensis. International Forestry Review, 7 (5). p. 172.

Chudleigh, P., Hardaker, T. and Clarke, M. (2021) Economic assessment of six research, development and extension investments by the Department of Agriculture and Fisheries (Queensland). Project Report. Agtrans Research.

D

Dakin, T. and Leggate, W. (2019) Development of durable engineered wood products in Papua New Guinea and Australia. Project Report. ACIAR.

Darzi, S., Karampour, H., Bailleres, H., Gilbert, B. P., McGavin, R. L. and Zadeh, S. (2021) Behaviour of composite timber sandwich panels subjected to bending and shear. In: World Conference on Timber Engineering 2021, WCTE 2021, 9-12 August 2021, Santiago, Chile.

Darzi, S., Karampour, H., Gilbert, B. P. and Bailleres, H. (2018) Numerical study on the flexural capacity of ultra-light composite timber sandwich panels. Composites Part B: Engineering, 155 . pp. 212-224. https://doi.org/10.1016/j.compositesb.2018.08.022

Darzi, S., Karampour, H., Bailleres, H., Gilbert, B. P. and Fernando, D. (2020) Load bearing sandwich timber walls with plywood faces and bamboo core. Structures, 27 . pp. 2437-2450. https://doi.org/10.1016/j.istruc.2020.08.020

Darzi, S., Karampour, H., Gilbert, B. P. and Bailleres, H. (2018) Flexural behaviour of a novel bamboo-plywood sandwich composite panel. In: World Conference on Timber Engineering, Seoul, Republic of Korea.

De Souza, N. M., Hayes, R. A., Brooks, P. R. and Nahrung, H. F. (2024) How to chew gum: the post-ingestion fate of foliar secondary compounds consumed by a eucalypt herbivore. Chemoecology, 34 . pp. 137-147. https://doi.org/10.1007/s00049-024-00409-2

Debuse, V. J., Smith, T. E., Holloway, C. T., Wiegand, A. N., Nahrung, H. F. and Lawson, S. A. (2018) Environmental influences on stem borer incidence in Australian subtropical Corymbia plantations. Journal of Pest Science, 92 (2). pp. 579-593.

Dickinson, G. R. and Huth, J. R. (2003) Susceptibility of Corymbia citriodora subsp. variegata, eucalyptus cloeziana and E. grandis to the cut-stump application of glyphosate following pre-commercial thinning operations in North-Eastern Australia. Journal of Tropical Forest Science, 15 (3). pp. 505-509.

Dorries, J. W., Venn, T. J., McGavin, R. L. and Tawake, S. (2024) A Decision–Support Tool to Inform Coconut Log Procurement and Veneer Manufacturing Location Decisions in Fiji. Forests, 15 (8). p. 1442. https://doi.org/10.3390/f15081442

F

Faircloth, A. (2025) The Global Perception and Understanding of Vibration and Acoustics in Timber Structures. Technical Report. Gottstein Trust.

Faircloth, A., Gilbert, B. P., Kumar, C., Leggate, W. and McGavin, R. L. (2024) Understanding the adhesion performance of glued laminated timber manufactured with Australian softwood and high-density hardwood species. European Journal of Wood and Wood Products, 82 . pp. 2013-2028. https://doi.org/10.1007/s00107-024-02138-3

Faircloth, A., Karampour, H., Gilbert, B. P., Watts, T., Li, H., Burdon, N., Butler, T. and Kumar, C. (2025) Design uncertainty in long span mass timber floors: proposed band-beam solution. In: World Conference on Timber Engineering 2025, 22 - 26 June 2025, Brisbane, Australia. https://doi.org/10.52202/080513-0058

Faircloth, A., Brancheriau, L., Karampour, H. and Kumar, C. (2024) Evaluation of full-sized and thick cross-laminated timber using in-line non-destructive techniques. Wood Material Science & Engineering, 19 (3). pp. 660-673. https://doi.org/10.1080/17480272.2023.2286622

Faircloth, A., Brancheriau, L., Karampour, H., So, S., Bailleres, H. and Kumar, C. (2021) Experimental Modal Analysis of Appropriate Boundary Conditions for the Evaluation of Cross-Laminated Timber Panels for an In-Line Approach. Forest Products Journal, 71 (2). pp. 161-170. https://doi.org/10.13073/FPJ-D-20-00062

Faircloth, A., Kumar, C., McGavin, R. L., Gilbert, B. P. and Leggate, W. (2023) Mechanical Performance and Bond Integrity of Finger Jointed High-Density Sub-Tropical Hardwoods for Residential Decking. Forests, 14 (5). p. 956. https://doi.org/10.3390/f14050956

Fehrmann, J., McGavin, R. L. and Leggate, W. (2017) Veneer grading and upgrading. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Fehrmann, J., McGavin, R. L. and Leggate, W. (2017) Veneer quality control. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Fitzgerald, C. J., Redman, A., Hopewell, G., McGavin, R. L. and Leggate, W. (2017) Log specifications, grading and pre-processing. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Francis, B., Venn, T. and Lewis, T. (2024) Timber Production Opportunities from Private Native Forests in Southern Queensland. Small-scale Forestry, 23 . pp. 1-24. https://doi.org/10.1007/s11842-023-09550-2

Francis, L. P., Hassan, B. and McGavin, R. L. (2023) Natural durability of mid-rotation plantation Gympie messmate and red mahogany in a 13-year aboveground field test. Australian Forestry, 86 (3-4). pp. 143-151. https://doi.org/10.1080/00049158.2023.2288778

Francis, L. P. and McGavin, R. L. (2008) Evaluation of wood characteristics of tropical post-mid rotation plantation Eucalyptus cloeziana and E. pellita: Part (a) Natural durability of timber. Project Report. Forest and Wood Products Australia Ltd, Victoria.

Francis, L. P., Semple, K. E., Hassan, B. and Morrell, J. J. (2023) Natural durability indicators in young plantation and native forest regrowth Gympie messmate (Eucalyptus cloeziana). Holzforschung, 77 (11-12). https://doi.org/10.1515/hf-2023-0057

G

Gardner, R. A. W. and Lee, D. J. (2021) Investigating the wood production and adaptability potential of Corymbia hybrid progeny in northern coastal Zululand, South Africa. Southern Forests: a Journal of Forest Science, 83 (2). pp. 1-9. https://doi.org/10.2989/20702620.2021.1894538

Gattas, J. M., Reid, C., Dakin, T., Shanks, J. and McGavin, R. L. (2024) Board assignment heuristics for nail laminated out-of-grade timber. Australian Journal of Civil Engineering . pp. 1-14. https://doi.org/10.1080/14488353.2024.2403049

Gendvilas, V., Lee, D. J., Kain, D. P., Kumar, C., Downes, G. M., Lausberg, M. and Harrington, J. J. (2024) Predicting Wood Density Using Resistance Drilling: The Effect of Instrument and Operator. Forests, 15 (1). p. 157. https://doi.org/10.3390/f15010157

Gilbert, B. P., McGavin, R. L., Wicker, S., Leggate, W., Faircloth, A. and Meldrum, S. (2025) Glued laminated timber and laminated veneer lumber structural products manufactured from Australian southern blue gum grown for woodchips. In: World Conference on Timber Engineering 2025, 22 - 26 June 2025, Brisbane, Australia. https://doi.org/10.52202/080513-0146

Gilbert, B. P., Underhill, I. D., Bailleres, H., El Hanandeh, A. and McGavin, R. L. (2014) Veneer based composite hollow utility poles manufactured from hardwood plantation thinned trees. Construction and Building Materials, 66 . pp. 458-466. https://doi.org/10.1016/j.conbuildmat.2014.05.093

Gilbert, B. P., Bailleres, H., Zhang, H. and McGavin, R. L. (2016) Mechanical properties of rotary veneers recovered from early to mid-rotation plantation Eucalyptus logs. In: 2016 World Conference on Timber Engineering, WCTE 2016, 22-25 August 2016, Vienna, Austria.

Gilbert, B. P., Bailleres, H., Fischer Maxime, F., Zhang, H. and McGavin, R. L. (2017) Mechanical Properties of Rotary Veneers Recovered from Early to Midrotation Subtropical-Hardwood Plantation Logs for Veneer-Based Composite Applications. Journal of Materials in Civil Engineering, 29 (10). 04017194. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002055

Gilbert, B. P., Davies, T. E., McGavin, R. L. and Dowse, C. J. (2024) Towards reducing the capital cost of manufacturing Laminated Veneer Lumbers: Investigating finger jointing solutions. Construction and Building Materials, 411 . p. 134158. https://doi.org/10.1016/j.conbuildmat.2023.134158

Gilbert, B. P., Underhill, I. D., Fernando, D., Bailleres, H. and Miller, D. (2018) Structural behaviour of hardwood veneer-based circular hollow sections of different compactness. Construction and Building Materials, 170 . pp. 557-569. https://doi.org/10.1016/j.conbuildmat.2018.03.105

Grant, P., Psaltis, S., Shirmohammadi, M. and Turner, I. (2024) Image-based mesh generation for constructing a virtual representation of engineered wood product samples. European Journal of Wood and Wood Products, 82 . pp. 1963-1980. https://doi.org/10.1007/s00107-024-02132-9

Grant, P., Psaltis, S., Shirmohammadi, M. and Turner, I. (2023) Constructing Virtual Representations of Laminated Timber Products. Research Square , Preprint. https://doi.org/10.21203/rs.3.rs-3323846/v1

H

Haigh, W., Nahrung, H. F., Hassan, B., Morrell, J. and Hayes, R. A. (2025) What’s good in the wood: unveiling chemical shifts induced by Cryptotermes brevis digestion. Holzforschung , 2025-0026. https://doi.org/10.1515/hf-2025-0026

Haigh, W., Hassan, B. and Hayes, R. A. (2023) West Indian drywood termite, Cryptotermes brevis, in Australia: current understanding, ongoing issues, and future needs. Australian Forestry, 85 (4). pp. 211-223. https://doi.org/10.1080/00049158.2022.2156361

Hall, M. K. D., Machuca-Mesa, L. M., Uzunovic, A., Yadav, S. K., Lee, D. and Nayak, M. K. (2025) Phosphine as a possible alternative to methyl bromide for the phytosanitary treatment of wood products. Journal of Stored Products Research, 113 . p. 102672. https://doi.org/10.1016/j.jspr.2025.102672

Hardaker, T. (2022) Impact assessment of six research, development and extension investments by the Queensland Department of Agriculture and Fisheries 2022 : Aggregate Analysis Summary Report. Project Report. Agtrans Research.

Harding, K.J., Zbonak, A., Copley, T.R., Nester, M.R., Dieters, M. J., Kain, D. and Last, I. S. (2010) Sub-tropical exotic pine taxa, growth, form and wood properties comparisons across multiple sites in coastal Queensland in: thinning and clearfall age trials; in family and clonal hybrid pine trials and in a genetics x fertiliser x weed control trial. Project Report. Forest and Wood Products Australia.

Hassan, B., Fitzgerald, C. J. and Minett, R. (2023) Toxicity, repellency, and horizontal transfer of foam insecticides for remedial control of an invasive drywood termite, Cryptotermes brevis (Blattodea: Kalotermitidae). BioResources, 18 (2). p. 2589. https://doi.org/10.15376/biores.18.2.2589-2610

Healey, A. L., Lupoi, J. S., Lee, D. J., Sykes, R. W., Guenther, J. M., Tran, K., Decker, S. R., Singh, S., Simmons, B. A. and Henry, R. J. (2016) Effect of aging on lignin content, composition and enzymatic saccharification in Corymbia hybrids and parental taxa between years 9 and 12. Biomass and Bioenergy, 93 . pp. 50-59. https://doi.org/10.1016/j.biombioe.2016.06.016

Hien Mai, T. and Redman, A. (2018) Characterisation of acacia and eucalyptus plantation wood for veneer production in vietnam. Journal of Forestry Science and Technology, 5 . pp. 127-135.

Hogg, B. W., Lewis, T., Huth, J. R. and Lee, D. J. (2021) Small-tree volume equations for subtropical hardwood plantation species. Australian Forestry, 84 (3). pp. 152-158. https://doi.org/10.1080/00049158.2021.1961417

Hopewell, G. (2004) An Investigation of Environmental Conditions Experienced During the Life of High Value Wood Components and Products. Masters thesis, University of Melbourne, Institute of Land and Food Resources, 120 pages.

Hopewell, G. (2018) What do macadamia nuts and fine timbers have in common? Project Report. State of Queensland.

Hopewell, G., Leggate, W. and McGavin, R. L. (2017) Rotary-peeled products: advantages and uses. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Huynh, T., Lee, D. J., Applegate, G. and Lewis, T. (2021) Field methods for above and belowground biomass estimation in plantation forests. MethodsX, 8 . p. 101192. https://doi.org/10.1016/j.mex.2020.101192

J

Jiao, S., Gunalan, S., Gilbert, B. P., Baleshan, B. and Bailleres, H. (2021) Experimental Investigation of an Innovative Composite Mullion Made of Aluminium and Timber. Journal of Building Engineering, 38 . p. 101907. https://doi.org/10.1016/j.jobe.2020.101907

K

Karampour, H., Piran, F., Faircloth, A., Kumar, C., Zhang, D., Gilbert, B. P., Guan, H., Hu, L., Chui, Y. H. and Chang, W. (2023) Design of long-span lightweight timber floors subject to walking excitations: a case study. In: 13th World Conference on Timber Engineering, WCTE 2023, 19 June - 22 June 2023, Oslo, Norway. https://doi.org/10.52202/069179-0247

Karampour, H., Piran, F., Faircloth, A., Talebian, N. and Miller, D. (2023) Vibration of Timber and Hybrid Floors: A Review of Methods of Measurement, Analysis, and Design. Buildings, 13 (7). p. 1756. https://doi.org/10.3390/buildings13071756

Karkoodi, S., Karampour, H., Lyu, C., Gilbert, B. P., McGavin, R. L., Gunalan, S. and Ghanbari-Ghazijahani, T. (2023) An investigation of a novel wood fibre-filled steel tubular (FFST) systems for construction. Construction and Building Materials, 401 . p. 132939. https://doi.org/10.1016/j.conbuildmat.2023.132939

Kirker, G. T., Hassan, B., Mankowski, M. E. and Eller, F. J. (2024) Critical Review on the Use of Extractives of Naturally Durable Woods as Natural Wood Protectants. Insects, 15 (1). p. 69. https://doi.org/10.3390/insects15010069

Klein, S., Belleville, B., Marfella, G., Keenan, R. and McGavin, R. L. (2025) Innovation in Timber Processing—A Case Study on Low-Grade Resource Utilisation for High-Grade Timber Products. Forests, 16 (7). p. 1127. https://doi.org/10.3390/f16071127

Kumar, C. (2022) Investigation of an innovative preservative treatment of green timber using compression. Wood Material Science and Engineering, 17 (6). pp. 513-520. https://doi.org/10.1080/17480272.2021.1898466

Kumar, C., Gilbert, B. P., Leggate, W., Faircloth, A. and Paul, C. K.-Y. (2025) Performance of particleboard incorporating recycled rubber from waste tyres. In: World Conference on Timber Engineering 2025, 22 - 26 June 2025, Brisbane, Australia. https://doi.org/10.52202/080513-0567

Kumar, C. (2021) Investigation of an innovative preservative treatment of green timber using compression. Wood Material Science & Engineering . pp. 1-8. https://doi.org/10.1080/17480272.2021.1898466

Kumar, C., Faircloth, A., Leggate, W. and Redman, A. (2022) Impact of Continuous Drying Method on Drying Quality of Southern Pine Sawn Timber. BioResources, 17 (1). pp. 574-591.

Kumar, C., Faircloth, A., Shanks, J., McGavin, R. L., Li, X., Ashraf, M. and Subhani, M. (2023) Investigating Factors Influencing Rolling Shear Performance of Australian CLT Feedstock. Forests, 14 (4). p. 711. https://doi.org/10.3390/f14040711

Kumar, C., Hassan, B. and Fitzgerald, C. J. (2024) Investigation of heat transfer in timber boards and a simulated wall section to eliminate colonies of the west Indian drywood termite, (Blattodea: Kalotermitidae). Austral Entomology, 63 (4). pp. 425-433. https://doi.org/10.1111/aen.12708

Kumar, C. and Leggate, W. (2022) An overview of bio-adhesives for engineered wood products. International Journal of Adhesion and Adhesives, 118 . p. 103187. https://doi.org/10.1016/j.ijadhadh.2022.103187

Kumar, C., Li, X., Subhani, M., Shanks, J., Dakin, T., McGavin, R. L. and Ashraf, M. (2022) A review of factors influencing rolling shear in CLT and test methodology. Journal of Testing and Evaluation, 50 (2). https://doi.org/10.1520/JTE20210160

Kumar, C., Psaltis, S., Bailleres, H., Turner, I., Brancheriau, L., Hopewell, G., Carr, E. J., Farrell, T. and Lee, D. J. (2021) Accurate estimation of log MOE from non-destructive standing tree measurements. Annals of Forest Science, 78 (1). p. 8. https://doi.org/10.1007/s13595-021-01031-w

Kumar, C., Redman, A., Leggate, W., McGavin, R. L. and Dakin, T. (2021) Assessment of the Application of a SMART THUMPER™ as a Low-cost and Portable Device Used for Stiffness Estimation of Timber Products. BioResources, 16 (3).

L

Leggate, W. (2018) Improving the durability performance of engineered wood products: A study tour of Europe and North America. Project Report. Gottstein Trust Fellowship Report.

Leggate, W. (2017) Protecting veneers and veneer-based products. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Leggate, W., Kumar, C., McGavin, R. L., Faircloth, A. and Knackstedt, M. (2021) The Effects of Drying Method on the Wood Permeability, Wettability, Treatability, and Gluability of Southern Pine from Australia. Bioresources, 16 (1). pp. 698-720.

Leggate, W. and McGavin, R. L. (2017) Manufacturing rotary veneer and veneer products from small logs: an overview. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Leggate, W., McGavin, R. L. and Bailleres, H. (2017) A guide to manufacturing rotary veneer and products from small logs. Project Report. ACIAR.

Leggate, W., McGavin, R. L. and Lewis, T. (2019) An Assessment of Native Forests in Queensland for the Potential Supply of Small-diameter, Peeler Logs for Spindleless Lathe Rotary-veneer Processing. BioResources, 14 (4). p. 15.

Leggate, W., McGavin, R. L., Miao, C., Outhwaite, A., Chandra, K. A., Dorries, J. W., Kumar, C. and Knackstedt, M. (2020) The Influence of Mechanical Surface Preparation Methods on Southern Pine and Spotted Gum Wood Properties: Wettability and Permeability. BioResources, 15 (4). pp. 8554-8576.

Leggate, W., McGavin, R. L., Outhwaite, A., Dorries, J. W., Robinson, R. J., Kumar, C., Faircloth, A. and Knackstedt, M. (2021) The Influence of Mechanical Surface Preparation Method, Adhesive Type, and Curing Temperature on the Bonding of Darwin Stringybark. BioResources, 16 (1). p. 22.

Leggate, W., McGavin, R. L., Outhwaite, A., Gilbert, B. P. and Gunalan, S. (2022) Barriers to the Effective Adhesion of High-Density Hardwood Timbers for Glue-Laminated Beams in Australia. Forests, 13 (7). p. 1038. https://doi.org/10.3390/f13071038

Leggate, W., McGavin, R. L., Outhwaite, A., Kumar, C., Faircloth, A. and Knackstedt, M. (2021) Influence of Mechanical Surface Preparation Methods on the Bonding of Southern Pine and Spotted Gum: Tensile Shear Strength of Lap Joints. BioResources, 16 (1). p. 16.

Leggate, W., Outhwaite, A., McGavin, R. L., Gilbert, B. P. and Gunalan, S. (2022) The Effects of the Addition of Surfactants and the Machining Method on the Adhesive Bond Quality of Spotted Gum Glue-laminated Beams. BioResources, 17 (2). pp. 3413-3434. https://doi.org/10.15376/biores.17.2.3413-3434

Leggate, W., Redman, A., Wood, J., Bailleres, H. and Lee, D. J. (2019) Radial Permeability of the Hybrid Pine (Pinus elliottii× Pinus caribaea) in Australia. BioResources, 14 (2). pp. 4358-4372.

Leggate, W., Shirmohammadi, M., McGavin, R. L., Chandra, K. A., Knackstedt, M., Knuefing, L. and Turner, M. (2020) Influence of Wood’s Anatomical and Resin Traits on the Radial Permeability of the Hybrid Pine (Pinus elliottii× Pinus caribaea) Wood in Australia. BioResources, 15 (3). pp. 6851-6873.

Leggate, W., Shirmohammadi, M., McGavin, R. L., Outhwaite, A., Knackstedt, M. and Brookhouse, M. (2021) Examination of wood adhesive bonds via MicroCT: The influence of pre-gluing surface machining treatments for southern pine, spotted gum, and Darwin stringybark timbers. BioResources, 16 (3). pp. 5058-5082.

Leggate, W., Palmer, G., McGavin, R. L. and Muneri, A. (2000) Productivity, sawn recovery and potential rates of return from eucalypt plantations in Queensland. In: IUFRO Conference, The Future of Eucalypts for Wood Products, 19-24 March, 200, Launceston, Tasmania.

Lewis, T., Chudleigh, F., Brawner, J. T., Pahl, L. I., McGavin, R. L. and Smith, T. E. (2018) Evaluation of an integrated plantation forestry and beef production system. Project Report. State of Queensland.

Lewis, T., Menzies, T., Brawner, J. T., Venn, T., Francis, B., Ryan, S., Schulke, B., Cameron, N. and Kelly, A. (2020) Improving productivity of the private native forest resource in southern Queensland and northern New South Wales. Project Report. Forest & Wood Products Australia.

Lewis, T., Pachas, N. A. and Venn, T. J. (2022) How can we grow the plantation estate and improve private native forest management in Australia? Silvopastoral systems provide a solution. Australian Forestry, 85 (2). pp. 55-59. https://doi.org/10.1080/00049158.2022.2096827

Lu, P., Gilbert, B. P., Kumar, C., McGavin, R. L. and Karampour, H. (2024) Comprehensive analysis of glulam delamination through finite element modelling considering heat and mass transfer, plasticity and fracture mechanics: a case study using high density hardwood. European Journal of Wood and Wood Products, 82 . pp. 1581-1604. https://doi.org/10.1007/s00107-024-02107-w

Lu, H. R., El Hanandeh, A., Gilbert, B. P. and Bailleres, H. (2017) A comparative life cycle assessment (LCA) of alternative material for Australian building construction. In: 1st International Conference on Advances in Sustainable Construction Materials and Civil Engineering Systems, ASCMCES 2017, University of SharjahSharjah; United Arab Emirates. https://doi.org/10.1051/matecconf/201712002013

Lu, P., Gilbert, B. P., Kumar, C., McGavin, R. L. and Karampour, H. (2023) Influence of the moisture content on the fracture energy and tensile strength of hardwood spotted gum sawn timber and adhesive bonds (gluelines). European Journal of Wood and Wood Products, 82 (1). pp. 53-68. https://doi.org/10.1007/s00107-023-01999-4

Lyu, C., Gilbert, B. P., Guan, H., Karampour, H., Shanmuganathan, G. and Leggate, W. (2023) An accurate finite element model to study the progressive collapse of post-and-beam mass timber buildings. In: 13th World Conference on Timber Engineering, WCTE 2023, 19 June - 22 June 2023, Oslo, Norway. https://doi.org/10.52202/069179-0368

M

Mainey, A., Gilbert, B. P., Bailleres, H., Gunalan, S. and Smith, M. (2019) Solutions to reduce moisture driven backout and improve withdrawal strength of nailplates: experimental investigations. European Journal of Wood and Wood Products, 77 (2). pp. 257-269.

Mainey, A., Gilbert, B. P., Redman, A., Gunalan, S. and Bailleres, H. (2021) Time dependent moisture driven backout of nailplates: experimental investigations and numerical predictions. European Journal of Wood and Wood Products, 79 (6). pp. 1589-1605. https://doi.org/10.1007/s00107-021-01735-w

Mainey, A. J., Gilbert, B. P., Fernando, D. and Bailleres, H. (2015) Thin-walled timber and FRP-timber veneer composite CEE-sections. School of Civil Engineering, The University of Queensland.

Manca, F., De Rosa, D., Reading, L. P., Rowlings, D. W., Scheer, C., Layden, I. A., Irvine-Brown, S. M., Schipper, L. A. and Grace, P. R. (2020) Nitrate removal and greenhouse gas production of woodchip denitrification walls under a humid subtropical climate. Ecological Engineering, 156 . p. 105988. https://doi.org/10.1016/j.ecoleng.2020.105988

Manh, H. T., Redman, A., Van, C. P. and Ngoc, B. D. (2022) Mass transfer properties of Acacia mangium plantation wood. Maderas: Ciencia y Tecnologia, 24 . https://doi.org/10.4067/s0718-221x2022000100402

Mankowski, M., Kirker, G. and Hassan, B. (2024) Potential of heartwood extracts as wood preservatives combined with linseed oil in 8-year above-ground and in-ground field trials. In: IRG55 Scientific Conference on Wood Protection, 19 - 23 May, 2024, Knoxville, Tennessee, USA.

McDonald, J., Fitzgerald, C. J., Hassan, B. and Morrell, J. (2022) Non-destructive Detection of an Invasive Drywood Termite, Cryptotermes brevis (Blattodea: Kalotermitidae), in Timber. Sociobiology, 69 (4). e7881. https://doi.org/10.13102/sociobiology.v69i4.7881

McGavin, R. L. (2017) Rotary peeling. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

McGavin, R. L. (2017) Veneer clipping and drying. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

McGavin, R. L., Bailleres, H., Lane, F. and Fehrmann, J. (2013) High value timber composite panels from hardwood plantation thinnings. Project Report. Department of Agriculture and Fisheries, Queensland.

McGavin, R. L. and Dakin, T. (2020) Mass-timber Construction in Australia: Is CLT the only answer? Bioresources, 15 (3). pp. 4642-4645. https://doi.org/10.15376/biores.15.3.4642-4645

McGavin, R. L. and Leggate, W. (2019) Comparison of Processing Methods for Small-diameter Logs: Sawing versus Rotary Peeling. BioResources, 14 (1). pp. 1545-1536.

McGavin, R. L., Leggate, W., Bailleres, H., Hopewell, G. and Fitzgerald, C. J. (2019) A guide to the rotary veneer processing of coconut palms. Project Report. Australian Centre for International Agricultural Research.

McGavin, R. L., Leggate, W. and Dorries, J. W. (2020) Increasing the Value of Forest Resources through the Development of Advanced Engineered Wood Products. Project Report. Forest & Wood Products Australia.

McGavin, R. L., McGrath, J., Fitzgerald, C. J., Kumar, C., Oliver, C. and Lindsay, A. (2021) Sawn Timber and Rotary Veneer Processing and Grade Recovery Investigation of Northern Australian Plantation Grown African Mahogany. BioResources, 16 (1). p. 23. https://doi.org/10.15376/biores.16.1.1891-1913

McGavin, R. L., Nguyen, H. H., Gilbert, B. P., Dakin, T. and Faircloth, A. (2019) A Comparative Study on the Mechanical Properties of Laminated Veneer Lumber (LVL) Produced from Blending Various Wood Veneers. BioResources, 14 (4). pp. 9064-9081.

McGavin, R. L., Vella, R. and Leggate, W. (2017) Product manufacture. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Miao, C., Fernando, D., Heitzmann, M. T. and Bailleres, H. (2019) GFRP-To-Timber Bonded Joints: Adhesive Selection. International Journal of Adhesion and Adhesives, 94 . pp. 29-39. https://doi.org/10.1016/j.ijadhadh.2019.05.007

Morrell, J.J. and Norton, J. (2009) Potential for using through-boring to improve groundline treatment of Australian wood species: A preliminary study. Forest Products Journal, 59 (9). pp. 61-66.

N

Ngugi, M. R., Neldner, V. J., Ryan, S., Lewis, T., Li, J., Norman, P. and Mogilski, M. (2018) Estimating potential harvestable biomass for bioenergy from sustainably managed private native forests in Southeast Queensland, Australia. Forest Ecosystems, 5 (1). p. 6. https://doi.org/10.1186/s40663-018-0129-z

Nguyen, H. H., Gilbert, B. P., McGavin, R. L. and Bailleres, H. (2019) Optimisation of cross-banded laminated veneer lumbers manufactured from blending hardwood and softwood veneers. European Journal of Wood and Wood Products, 77 (5). pp. 783-797. https://doi.org/10.1007/s00107-019-01434-7

Nguyen, H., Gilbert, B. P., McGavin, R. L. and Bailleres, H. (2018) Optimisation of cross-banded laminated veneer lumbers manufactured from spotted gum and southern pine veneers. In: 2018 World Conference on Timber Engineering, WCTE 2018, 19-23 August 2018, Seoul, South Korea.

Nguyen, H. H., McGavin, R. L., Gilbert, B. P. and Bailleres, H. (2019) Key Mechanical Properties of Cross-banded Laminated Veneer Lumbers Manufactured from Blending Spotted Gum and Hoop Pine Veneers. BioResources, 14 (4). p. 15.

Nguyen, T. T., Redman, A., Leggate, W., Vandi, L.-j., Bailleres, H. and Heitzmann, M. (2021) Processing Parameters Optimization of Cotton Stalk (Gossypium hirsutum L.) Particleboards with Emulsifiable Polymeric Isocyanate Adhesive. BioResources, 16 (2).

Nguyen, T. T., Heitzmann, M. T., Vandi, L., Bailleres, H. and Redman, A. (2019) The influences of particle sizes on performance of biodegradable wood plastic composites manufactured from lingo-cellulosic agricultural waste. In: 22nd International Conference on Composites Materials (ICCM22), August 11-16 2019, Melbourne, Australia.

Nikles, D.G. (2004) A proposal for consideration: establish a northern Australia cooperative tree improvement program (NACTIP), initially with African mahogany (Khaya senegalensis). In: Prospects for high-value hardwood timber plantations in the 'dry' tropics of Northern Australia: Proceedings of a Workshop held in Mareeba, North Queensland, Australia, 19-21 October, 2004. Private Forestry North Queensland Association, 28 pages.

Nikles, D.G., Reilly, D.F., Dickinson, G. R., Bailleres, H., Huth, J.R., Zbonak, A. and Lee, D. J. (2014) Domesticating African mahogany (Khaya senegalensis) in northern Australia – underpinning investment in plantations. Pp 104-130. In: “Trees – the future crop for changing climates”. Proceedings – Full Papers, Australian Forest Growers National Conference held at Forest Research Centre Southern Cross University, Lismore, NSW., 26 October – 29 October 2014, Lismore, NSW 2480. 218 pp.

Nolan, G., McGavin, R. L., Blackburn, D. and Bulai, S. (2019) Development of advanced veneer and other products from coconut wood to enhance livelihoods in South Pacific communities. Project Report. Australian Centre for International Agricultural Research.

Norton, J.H. (2012) Improving the durability of low durability plantation hardwoods for use as power poles. Project Report. Forest & Wood Products Australia.

Norton, J., Francis, L. P. and Morrell, J. J. (2023) Through-boring to improve the performance of low durability Eucalyptus species for utility poles: 10-year field test results of pole stubs exposed in Southeast Queensland. In: International Research Group on Wood Protection (IRG-WP), 28 May - 1st June 2023, Cairns, Australia.

P

Page, T., Potrawiak, A., Berry, A., Tate, H., Tungon, J. and Tabi, M. (2010) Production of sandalwood (Santalum austrocaledonicum) for improved smallholder incomes in Vanuatu. Forests, Trees and Livelihoods, 19 (3). pp. 299-316. https://doi.org/10.1080/14728028.2010.9752673

Paul, K. I., Roxburgh, S. H., England, J. R., Ritson, P., Hobbs, T., Brooksbank, K., John Raison, R., Larmour, J. S., Murphy, S., Norris, J., Neumann, C., Lewis, T., Jonson, J., Carter, J. L., McArthur, G., Barton, C. and Rose, B. (2013) Development and testing of allometric equations for estimating above-ground biomass of mixed-species environmental plantings. Forest Ecology and Management, 310 . pp. 483-494. https://doi.org/10.1016/j.foreco.2013.08.054

Piran, F., Karampour, H., Guan, H., Kumar, C., Li, H. and Junior, G. C. (2025) Strengthening lightweight long-span timber floors: A study on vibration performance and human perception. Engineering Structures, 343 . p. 121062. https://doi.org/10.1016/j.engstruct.2025.121062

Psaltis, S., Kumar, C., Turner, I., Carr, E. J., Farrell, T., Brancheriau, L., Bailléres, H. and Lee, D. J. (2021) A new approach for predicting board MOE from increment cores. Annals of Forest Science, 78 (3). p. 78. https://doi.org/10.1007/s13595-021-01093-w

R

Redman, A. (2017) Modelling of vacuum drying of Australian hardwood species. PhD thesis, Queensland University of Technology, 235 pages.

Redman, A., Bailleres, H., Gilbert, B. P., Carr, E. J., Turner, I. W. and Perré, P. (2017) Finite element analysis of stress-related degrade during drying of Corymbia citriodora and Eucalyptus obliqua. Wood Science and Technology . pp. 1-23. https://doi.org/10.1007/s00226-017-0955-0

Redman, A., Bailleres, H., Gilbert, B. P., Carr, E. J., Turner, I. W. and Perré, P. (2018) Finite element analysis of stress-related degrade during drying of Corymbia citriodora and Eucalyptus obliqua. Wood Science and Technology, 52 (1). pp. 67-89. https://doi.org/10.1007/s00226-017-0955-0

Redman, A., Bailleres, H. and Perré, P. (2011) Characterization of viscoelastic, shrinkage and transverse anatomy properties of four Australian hardwood species. Wood Material Science & Engineering, 6 (3). pp. 95-104. https://doi.org/10.1080/17480272.2010.535014

Redman, A., Bailleres, H., Perré, P., Carr, E. and Turner, I. (2017) A relevant and robust vacuum-drying model applied to hardwoods. Wood Science and Technology, 51 (4). pp. 701-719. https://doi.org/10.1007/s00226-017-0908-7

Redman, A., Bailleres, H., Turner, I. and Perré, P. (2016) Characterisation of wood–water relationships and transverse anatomy and their relationship to drying degrade. Wood Science and Technology, 50 (4). pp. 739-757. https://doi.org/10.1007/s00226-016-0818-0

Redman, A. and McGavin, R. L. (2010) Accelerated drying of plantation grown Eucalyptus cloeziana and Eucalyptus pellita sawn timber. Forest Products Journal, 60 (4). pp. 339-345.

Robinson, R. J. and Meldrum, S. (2023) Identifying compatible waterborne timber preservatives and fire retardants for use in a VPI system: a practical approach. In: International Research Group on Wood Protection (IRG-WP), 28 May - 1st June 2023, Cairns, Australia.

Robson, K. (2004) Experiences with sandalwood in plantations in the South Pacific and north Queensland. In: Prospects for high-value hardwood timber plantations in the 'dry' tropics of Northern Australia: Proceedings of a Workshop held in Mareeba, North Queensland, Australia, 19-21 October, 2004. Private Forestry North Queensland Association, 28 pages.

Roder, C., Gerber, C., Shirmohammadi, M. and Singh, T. (2025) Moisture ingress and movement pattern in Australian CLT panels – a pilot study. In: World Conference on Timber Engineering 2025, 22 - 26 June 2025, Brisbane, Australia. https://doi.org/10.52202/080513-0315

S

Sanewski, G. M. (2010) Understanding the cropping behaviour of Riberry (Syzygium leuhmannii). Project Report. Rural Industries Research and Development Corporation.

Shirmohammadi, M., Karbaschi, M.R., Hassan, B. and Leggate, W. (2023) Investigating wood anatomical factors influencing the treatability of refractory southern pine - an imaging approach. In: International Research Group on Wood Protection (IRG-WP), 28 May - 1st June 2023, Cairns, Australia.

Shirmohammadi, M., Strang, M., Leardini, P., Baber, K. and Faircloth, A. (2025) Moisture monitoring of mass timber building - study of condition variation and building environment design. In: World Conference on Timber Engineering 2025, 22 - 26 June 2025, Brisbane, Australia. https://doi.org/10.52202/080513-0316

Shirmohammadi, M. (2022) A Review of Traceability Systems in the Timber Industry. In: Wood Industry - Past, Present and Future Outlook. IntechOpen, Rijeka. https://doi.org/10.5772/intechopen.106704

Shirmohammadi, M. (2022) Investigating Antimicrobial Characteristics/Advantages of Australian Wood Species for Use in Food Packaging - A Feasibility Study. Forests, 13 (2). p. 334. https://doi.org/10.3390/f13020334

Shirmohammadi, M. (2023) Investigating the effects of moisture ingress on the performance and service life of Australian mass timber panels-characterization outcomes. In: 13th World Conference on Timber Engineering, WCTE 2023, 19 June - 22 June 2023, Oslo, Norway. https://doi.org/10.52202/069179-0079

Shirmohammadi, M. (2023) Study of mass transfer and hygroscopic properties of Australian mass-timber panels and species in hot and humid conditions- moisture sorption and desorption. Wood Material Science & Engineering, 19 (1). pp. 220-234. https://doi.org/10.1080/17480272.2023.2235566

Shirmohammadi, M. (2023) Study of the hygroscopic properties of three Australian wood species used as solid wood and composite products. European Journal of Wood and Wood Products, 81 (6). pp. 1495-1512. https://doi.org/10.1007/s00107-023-01966-z

Shirmohammadi, M. and Faircloth, A. (2023) Effect of Alternate Drying Techniques on Cross-Laminated Timber after Exposure to Free-Water Wetting. Forests, 14 (5). p. 1007. https://doi.org/10.3390/f14051007

Shirmohammadi, M., Faircloth, A., Paul, C. K.-Y. and Fitzgerald, C. J. (2023) Assessment of Termite Damage in Cross-laminated Timber Sections Using Micro-computed Tomography and Vibration Analysis. BioResources, 18 (3). pp. 4430-4449. https://doi.org/10.15376/biores.18.3.4430-4449

Shirmohammadi, M., Faircloth, A. and Redman, A. (2021) Assessment of sound quality: Australian native hardwood species for guitar fretboard production. European Journal of Wood and Wood Products, 79 (2). pp. 487-497. https://doi.org/10.1007/s00107-020-01631-9

Shirmohammadi, M., Faircloth, A. and Redman, A. (2020) Determining acoustic and mechanical properties of Australian native hardwood species for guitar fretboard production. European Journal of Wood and Wood Products, 78 . pp. 1161-1171. https://doi.org/10.1007/s00107-020-01599-6

Shirmohammadi, M. and Leggate, W. (2021) Review of Existing Methods for Evaluating Adhesive Bonds in Timber Products. IntechOpen, 30 pages.

Shirmohammadi, M., Leggate, W. and Redman, A. (2021) Effects of moisture ingress and egress on the performance and service life of mass timber products in buildings: a review. Construction and Building Materials, 290 , 123176. https://doi.org/10.1016/j.conbuildmat.2021.123176

Simpson, J. and Osborne, D. (2006) Performance of seven hardwood species underplanted to Pinus elliottii in south-east Queensland. Forest Ecology and Management, 233 (2-3). pp. 303-308. https://doi.org/10.1016/j.foreco.2006.05.021

Smith, R.G.B., Harding, K., Zbonak, A. and Thomas, D.S. (2010) Wood properties and knot occlusion of plantation grown Eucalyptus dunnii and Corymbia citriodora subsp. variegata in a pruning and thinning experiment. In: The 6th International Symposium Wood Structure and Properties´10, September 6-9, 2010, Podbanske, High Tatras, Slovakia.

Smith, H., Faircloth, A., Phengthajaim, V., Souphaxy, K., Tiemaliya, S. and Boupha, L. (2022) Research Note Rubberwood Value Chains in Laos: early observations from an emerging opportunity. Technical Report. ACIAR.

Smith, H., Leggate, W., Faircloth, A. and et al. (2023) Advancing enhanced wood manufacturing industries in Laos and Australia. Technical Report. ACIAR.

Strang, M., Leardini, P. and Shirmohammadi, M. (2023) Validating moisture-safe energy efficient CLT assemblies in hot and humid climates using experimental testing. In: World Conference on Timber Engineering (WCTE2023), 19-22 June 2023, Oslo, Norway. https://doi.org/10.52202/069179-0577

Sub-Department of Forestry, Queensland (1933) The Veneer And Plywood Industry Of Queensland. Technical Report. State of Queensland.

T

Taylor, D., King, J., Swift, S., Hopewell, G., Debuse, V. J., Roberts, S. and Cotter, D. (2005) The influence of forest management on sawn timber recovery and value in cypress pine: A report for the RIRDC/Land and Water Australia/FWPRDC Joint Venture Agroforestry Program. Project Report. Rural Industries Research and Development Corporation.

Thulasidas, P.K. and Bailleres, H. (2017) Wood Quality for Advanced Uses of Teak from Natural and Planted Forests. In: The Global Teak Study: Analysis, Evaluation and Future Potential of Teak Resources. International Union of Forest Research Organizations (IUFRO), Vienna, Austria.

U

Underhill, I. D., Gilbert, B. P., Bailleres, H., McGavin, R. L. and Patterson, D. (2014) Structural Veneer Based Composite Products from Hardwood Thinning - Part I: Background and Manufacturing. RILEM Bookseries, 9 . pp. 577-588.

V

Vanclay, J. K. (1980) Small tree stem volume equations for three plantation species. Series: Queensland. Department Of Forestry. Research Note No. 32 (32). State of Queensland.

Vega, M., Hamilton, M. G., Blackburn, D. P., McGavin, R. L., Baillères, H. and Potts, B. M. (2015) Influence of site, storage and steaming on Eucalyptus nitens log-end splitting. Annals of Forest Science . pp. 1-10. https://doi.org/10.1007/s13595-015-0496-3

Vella, R., Fehrmann, J., McGavin, R. L. and Leggate, W. (2017) Product grading and quality. In: A guide to manufacturing rotary veneer and products from small logs. ACIAR, Canberra.

Vella, R., Heitzmann, M. T., Redman, A. and Bailleres, H. (2019) Comparison of Test Methods for the Determination of Delamination in Glued Laminated Timber. BioResources, 14 (4). pp. 7920-7934.

Vella, R., Heitzmann, M. T. and Redman, A. (2019) Improving the Adhesion of High-Density Softwoods with Isocyanate Based Adhesives through Surface Incision. BioResources, 14 (4). p. 12.

Venn, T. J. and McGavin, R. L. (2021) A decision-support system to assist forest industry planning and investment when data are scarce: the case of hardwood veneering in subtropical eastern Australia. Australian Forestry, 84 (2). pp. 59-72. https://doi.org/10.1080/00049158.2020.1836453

Venn, T., McGavin, R. L. and Leggate, W. (2004) Portable Sawmilling Costs for Landholders in Western Queensland. Working Paper. University of Queensland.

Venn, T. J. (2005) Financial and economic performance of long-rotation hardwood plantation investments in Queensland, Australia. Forest Policy and Economics, 7 (3). pp. 437-454. https://doi.org/10.1016/j.forpol.2003.08.003

Venn, T. J., Dorries, J. W. and McGavin, R. L. (2021) A mathematical model to support investment in veneer and LVL manufacturing in subtropical eastern Australia. Forest Policy and Economics, 128 . p. 102476. https://doi.org/10.1016/j.forpol.2021.102476

Venn, T. J., Dorries, J. W., McGavin, R. L. and Leggate, W. (2022) Impact of Facility Location on the Financial Performance of Integrated and Distributed LVL Production in Subtropical Eastern Australia. Forests, 13 (11). p. 1903. https://doi.org/10.3390/f13111903

Venn, T. J., McGavin, R. L. and Leggate, W. (2004) Utilisation of western Queensland hardwoods as speciality timbers. Project Report. Rural Industries Research and Development Corporation.

Venn, T. J., McGavin, R. L. and Rogers, H. M. (2003) Managing woodlands for income maximisation in western Queensland, Australia: clearing for grazing versus timber production. Forest Ecology and Management, 185 (3). pp. 291-306. https://doi.org/10.1016/S0378-1127(03)00225-1

Venn, T. J., McGavin, R. L. and Ergashev, A. (2020) Accommodating Log Dimensions and Geometry in Log Procurement Decisions for Spindleless Rotary Veneer Production. BioResources, 15 (2). pp. 2385-2411.

W

Wehr, J. B., Lewis, T., Dalal, R. C., Menzies, N. W., Verstraten, L., Swift, S., Bryant, P., Tindale, N. and Smith, T. E. (2020) Soil carbon and nitrogen pools, their depth distribution and stocks following plantation establishment in south east Queensland, Australia. Forest Ecology and Management, 457 . p. 117708. https://doi.org/10.1016/j.foreco.2019.117708

Wood, K., Morrell, J. and Leggate, W. (2020) Enhancing the durability of low durability Eucalyptus plantation species: a review of strategies. In: International Research Group On Wood Protection, 10-11 June 2020.

X

Xu, Z. H., Saffigna, P. G., Farquhar, G. D., Simpson, J. A., Haines, R. J., Walker, S., Osborne, D. O. and Guinto, D. (2000) Carbon isotope discrimination and oxygen isotope composition in clones of the F1 hybrid between slash pine and Caribbean pine in relation to tree growth, water-use efficiency and foliar nutrient concentration. Tree Physiology, 20 (18). pp. 1209-1217. https://doi.org/10.1093/treephys/20.18.1209

Y

Yi, T., Norton, J., Meldrum, S. and Morrell, J.J. (2023) Sensitivity of copper indicators for detecting preservative penetration. In: International Research Group on Wood Protection (IRG-WP), 28 May - 1st June 2023, Cairns, Australia.

Z

Zaben, A., Bailleres, H., Vella, R., McGavin, R. L., Fernando, D., Lange, D. and Maluk, C. (2021) Residual performance of a prototype hybrid Timber-FRP glulam beam after fire. In: World Conference on Timber Engineering 2021, WCTE 2021 9 -12 August 2021, 9 -12 August 2021, Santiago, Chile.

Zbonak, A., Harding, K., Copley, T.R. and Nester, M.R. (2010) The effect of initial spacing and thinning on wood quality and graded sawn recovery of mature Caribbean pine grown in Queensland. In: The 6th International Symposium Wood Structure and Properties ´10, September 6-9, 2010, Podbanske, High Tatras, Slovakia.

Zbonak, A., Bailleres, H., McGavin, R. L. and Harding, K. (2012) Processing small diameter logs from sub-tropical species. In: Australian Forest Growers Conference, October 2012, Gympie.